4/21/2024 0 Comments Record spotify with audacity![]() ![]() Again, simple things knock Audacity out of monitoring mode, but you can switch monitoring off, then back on, and it carries on working. I find the Audacity level meters a bit more informative than the command-line jobbie attached to arecord. Lo and behold, the level meters come to life, and you can hear what is coming into your line input. This effectively connects the line input to your speakers.Ĭlick the down-arrow next to the microphone icon, and select “Start Monitoring.” Pull down the “Transport” menu and make sure that “Software Playthrough” is checked. The input is selected as “default: Line:0” and the output as “ALSA.” You can see my Audacity session at upper right of the screenshot. This is where Audacity comes into its own. For music videos, I was finding it much better to record the sound track separately and sync it to the video later, so I could not look at the video to see where things had progressed to. Now we can record, but we can't hear what is being recorded. This allows you to set the level to give a reasonable fill of the level meter without clipping.īeware: the “Input Volume” slider is very sensitive but once selected, you can inch it up and down with the left- and right-arrow keys on the keyboard. Click on the speaker icon in the system tray left of the update status, and select “Sound Settings.” This produces the screen at lower right: select the “Input” tab. Next thing is to adjust the level on the line signal. This generates about 10.6 Mbyte per minute. V stereo produces the VU meter on the line after the command. f cd sets the resolution (16 bits) and the sample rate (44.1 kHz) to the normal PCM standard. The -c 2 parameter puts arecord into stereo mode. The screenshot shows an arecord session in the terminal window at top left. This has proven to be very reliable, and makes nice (huge) WAV files from the line input. It is a very simple command-line application, which can be persuaded to show a VU meter of sorts. When I tried to splice the resulting clips, Audacity just sneered at me and crashed.Īfter a lot of research I discovered that arecord is built into our Linux distros. Changing focus appeared to knock it out of record mode, and even when I left the computer alone with only Audacity running, it still dropped out of record mode. The problem is that on long recordings (over an hour), Audacity has a nasty problem of stopping, locking up or dropping periods of recording. The application of choice for recording audio appeared to be Audacity. This involves purchasing or making up an adaptor cable from twin RCA connectors to miniature stereo jack. The solution is to use the 2861 hardware to record the video, and record the audio via the computer line input. The usual video capture hardware based on the Empia 2861 chipset produces rubbish audio, noisy, distorted and full of glitches and dropouts. My project involves copying all my old VHS tapes to DVD. There are lots of posts and tutorials about this subject, and it is fraught with challenges. Pulse more-or-less gets you a virtual rack with a GUI. This is admittedly very similar to what was suggested by Dario Salvati, and more and more distros are duplicating Pulse features in their default sound but I've found them to be a bit sketchy on monitors. Usually you'll want "Monitor of Built-In Analog Stereo", or your equivalent, and Audacity will start recording what's leaving your speakers. Some of those inputs are what's called "monitors", which is basically a watch on what's coming out of your speakers or moving to any other output device. From there, you can use a drop-down to switch which input it is listening to. Open it and you'll find a few tabs Playback and Recording, which cover program terminals and also Input and Output, which are about detected hardware, and last Configuration, which is pretty self-explanatory and not something you'll usually need to worry about.Īfter pressing Record on Audacity, Audacity will show up under the Recording pane. along with its dependencies, which are probably already on your machine. You can get it on just about any Ubuntu-based distro through the software center, or via: sudo apt install pavucontrol It's easy if you've got Pulse Audio Volume Control (though Pulse has gotten a little bit buggy in recent years). I understand your question as "how can I use Audacity to record audio that is being streamed to me?" There are a lot of good answers here and I recognize that this question was from a while ago, but they don't quite touch on how I usually do it, so I felt I'd contribute. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |